Відео

Thank you!!

Thanks! can you confirm if the ball head size? 1" or less? Thank you

I have a question, how tall are you?

Thanks! I just puchased that same unit

Thank you for the video, I had the exact same lights and warnings and just disconnected the battery and they all went away, the fuel cap seemed fine so I did not replace it. Thanks again!

My Father once told me about a Joyroom he visited in the Philippines back during Nam. He said for $25 you could have a room, food, beer and woman all night long.

Looks good.

Bro.! 😎 Eureka💡I have been trying to find the parts from another JD mower that would be compatible with my JD EZTRAK Z445. Searched and searched. Could not find it. You saved me big bucks and time. THANK YOU.

Cut bottom from soda or water bottles and either glue or wire tie down and sit those 3 balls in them to hold in place .

Too bad they've discontinued this model. There's a number of these (2023) in my area available right now but I'm not going to buy a discontinued model.

Huge thank you , who could possibly believe a fuel cap would be the problem, yes it was the fuel cap,I’ve used you tube so much over the past several months to fix up my mechanical issues, huge thank you have saved hundreds of dollars, I’m daz from australia

mine came broken, a total waste of money

Screw down a baby food jar lid where you want your rubber balls. Make little cups for them to sit into.

I have the same issue. Great video it was the drain plug.

My CBS station switched over to DRM encryption and I can't watch it with this so I disconnected it and will wait until ATSC 3.0 figures out the DRM BS. Until then I'm not messing with this and just sticking with 1.0.

I can't find a DVR with ATSC 3.0, when do you think they will come out?

Thank you so much for a very nice review because of you I bought this item and it works great. Very cheap price at 20 bucks you can’t go wrong.👍

mine worked for 2 hrs..frozze. reboot did not work ..pos....i get better from the same antennae on my lg oled tv..

You can problably fix the audio delay in your tv's audio settings. There you can manually adjust the "sound out sync" setting.

That’s it ! I’ve struggled with this exact thing, plus a trans fluid temp code. Cleared all codes, stored and temp, replaced the gas cap and ALL of them went away ! Drove 30 miles to make sure. Thanks !

I have the exact same machine with 32.hours on it. Oil leak in the same spot. I'm heading to Best Line to see what they plan to do. THanks for the video

Ha, seems the shops pay so much for the diagnostic machines that they spend all there time reading the codes and trust the on board computer will tell them what to replace. I think that leads to a lot of parts replaced that don't need to be. IMHO

If the case and mounting plate was made for each other, why did it not latch on and you had to sand down to make fit? The new rack shouldn’t have made a difference.

Thank you for the grind tip. I was going crazy trying to get the latch to seat all the way. I appreciate it.

Definitely Not going to get the zapperbox.

Dude... you need to dust..

NEXTGEN-TV is a OTA internet TV failure = NO OTA NEXTGEN-TV for anyone that is not close to the 15 minute city or town. NEXTGEN-TV can do shorter range OTA with more tv sub channels with higher resolution or less sub channels with lower resolution with longer range. Local advertisers want local tv viewers not viewers that live far away = MONEY. This means Advertisers will be given your name and what tv shows you watch. I currently receive Longer Range, No Spyware, DRM free, Old School OTA version 1.0 TV from DC. I also own the first official NEXTGEN-TV ADTH tuner and 35 miles out of DC and NEXTGEN-TV is unwatchable because of weak signals on the best outside yagi directional antennas with preamps. NEXTGEN-TV = no OTA TV.

How did you get the wood under the front tires?

My god are you stoned! The most boring video I've ever seen however when I can't sleep this is my go-to video😁

Well now this was a interesting video and I own a Hustler. Xone with 60 inch deck. I installed the flex forks on my Hustler and I noticed a big difference. The ride is much smoother.

Need an update

Just got it back from the dealership where it was fixed under warranty. They said it was the oil drain valve spigot where it attached to the engine. I've ran it once and so far it does seem to be not leaking anymore. I will keep monitoring the situation after every use to be sure. But for now it seems to be fixed.

Are you near a cellular tower or pole mount cell site? Since the FCC just recently sold TV channel 37 and higher to cell phone carriers, and now they are deploying equipment on those frequencies, this is becoming a big problem with UHF TV receivers that have no LTE filter in their design. The first clue to me that you could have that issue is when you started losing signal QUALITY and the 10 dB attenuation helped. You should not ever need to throw away antenna gain with attenuation. Buy a quality LTE filter and take the attenuator out. The issue with delay, and eventual shuttering looks like buffering to me. Once again, if the receiver has to use error correction to fix interference, it will eventually run out the buffer until you re-select the channel and store another reserve of buffer. I think you have a cell site nearby, and that is causing the issue. Get a filter. BTW - I'm 20 miles from my 1.0/3.0 tower sites, and also have a cell site right next to me in the path towards the TV transmitter towers. I couldn't get much of anything until I put LTE filtering in-line. Now I get everything. The FCC screwed many people with this predictable scenario. They FAILED the public. The FCC should be providing at least TWO FREE LTE FILTERS for every household that requests them, and they should make many public announcements to ensure people know they are available for free. It sickens me (an RF Engineer) to see the unknowing public struggle with an issue they would not know about causing angst. There are many potential interference issues (like power line leakage noise...very common... and some low quality LED lights creating noise) that can also be unseen interferes doing harm to reception. Until you verify noise sources with a spectrum analyzer (seeing is believing), you can only wrestle with reposition the antenna to get more signal to overcome the noise (signal to noise ratio). It's a hostile environment in radio land, and the FCC is directly responsible for allowing these conditions by lack of enforcement on products and services that violate RFI/EMI emissions. Then there is the overload issue from cell sites on devices that were not designed to safeguard against unforeseen spectrum reassignments (who remembers the Nextel interference with public safety on 800 MHz debacle ?). The FCC is about BIG MONEY, and not protecting the PUBLIC airwaves. They keep FAILING their mission for lobby groups looking to buy up all the PUBLIC AIRWAVES. It's a violation of the communications act of 1934. Educate yourselves, otherwise they big money wins and we all lose.

I do need to see how to get the seat off.

Dang 8400? I bought a new 48" this year and it was 9400

Swimming noodles and Zip ties ❣️😊

Thanks for that last tip: sanding down the knobs to set the lock. I am having the same issue with the latch not locking.

Subaru went to shit years ago. Pull up late model TSB's and list way longer than 07 or earlier

How did you get the seat off

Why paint the bonnet

Remember to reset tie pressures as marked on tires

Where did you get the trailer hitch bracket

A fun project. I did my XT-1 LT-46 KOHLER 43 last month

Simple It's The O Ring On The Dip Stick we Got A Update From Kawasaki Addressing This Issue

Hello. Where do you put the sticker? Mine doesn't have the sticker. And the space from the rear light to the fitting is touching

I have the same problem. Any luck finding the leak?

I have a FasTrak 54 I bought new in 2013. It’s been a great mowing machine. Had to have the right hydro fan pulley replaced at 350 hrs…got noisy…$120 and that’s it. I have the 2 bag system for fall,leaves and it works great. Hustler is a great brand. Btw, paid $5600 in 2013 for the mower and $1600 for the bagger system. I see the 2023 is about $8500 plus $2000 for the bagger….yikes!

how do you turn it off

Wonder if some Velcro would work. And if the seat it a little high maybe saw a small part of the ball off. This would lessen the angle change and give the Velcro a flat surface to grip on to. 🤔

Looks like you have alot to cut...that mow is filthy dirty...ya got to clean it and detail it to find that leak. Looks like oil all over to me. Put blue painters rape on low temp flat areas, on yellow paint to see oil better. Make sure its not transmission oil too. Look for leaks without too and then with too...good luck.